GB/T 31125-2014 Translated English of Chinese Standard (GB/T31125-2014, GBT 31125-2014): Test method of adhesive tapes -- Loop tack [Buy--download True-PDF in 3-second: https://play.google.com/books > Sign in > This BOOK > "3-dots" > Export > Save as "*.pdf"]This standard specifies a test method for determining the initial tack of adhesive tapes, by the loop tack method. This standard applies to the determination of the initial tack of adhesive tapes. It can be used for product quality control and research. |
From inside the book
Results 1-3 of 3
Page 5
You have reached your viewing limit for this book.
You have reached your viewing limit for this book.
Page 8
You have reached your viewing limit for this book.
You have reached your viewing limit for this book.
Page 11
You have reached your viewing limit for this book.
You have reached your viewing limit for this book.
Common terms and phrases
24 mm adhesive 24 mm wide Adhesive Products adhesive side faces adhesive tape sample agents and wiping annular specimen ring area of 24 automatic loop tack Bend the specimen clean the stainless cleaned stainless steel Cleaning agents Conditioning and test Contact position contaminating covering the specimen document dynamometer failure mode fasten the ends fixing screw GB/T initial tack loop adhesive tape loop tack performance loop tack testing Lower gripper maximum tensile force mm/min performance testing machine perimeter PET film reagents relative humidity Release paper Schematic diagram shown in Figure specimen completely speed of 300 stainless steel test standard steel test panel support carrier tack of adhesive tack performance testing tack testing machine tape The adhesive tensile testing machine terms and definitions test fixture Test method test report testing machine method transfer the sample Turn the specimen unsupported adhesive tape upper assembly upper gripper wide adhesive tape Width wiping materials